Idea
In short
How do you build an op-amp integrator?
An LM358 integrator turns a square wave from a Nano into a triangle wave, and you measure how the output size changes with frequency. You need LM358 Op-Amp, Arduino Nano, 9 V battery × 2, 9 V battery snap with DC jack × 2, Resistor 10 kΩ × 2, Ceramic Capacitor 100 nF, Resistor 1 MΩ, Electrolytic capacitor 10 µF, Digital multimeter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 10
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
See an integrator turn square into triangle.
Parts list
- Integrated Circuits
- Development Boards
- Batteries9 V battery × 2
- Power
- PassivesResistor 10 kΩ × 2
- Passives
- Passives
- Passives
- Tools & Instruments
- Prototyping
How to build it
- Build a split supply from two 9 V batteries
- Send a 500 Hz square wave from the Nano
- Add the integrating capacitor and the drift resistor
- Measure the output swing
- Change the frequency and compare
Common questions
What parts do I need for the op-amp integrator?
LM358 Op-Amp, Arduino Nano, 9 V battery × 2, 9 V battery snap with DC jack × 2, Resistor 10 kΩ × 2, Ceramic Capacitor 100 nF, Resistor 1 MΩ, Electrolytic capacitor 10 µF, Digital multimeter and Breadboard 830 Tie Points.
How long does the op-amp integrator take to build?
About 180 minutes for a intermediate maker.
