Idea
In short
How do you build a radio range test?
Measure packet loss of an nRF24 link over distance, with and without an antenna module. You need Arduino Nano × 2, nRF24L01+ Radio Module, NRF24L01+ PA LNA with antenna, Electrolytic Capacitor 100 µF × 2, SSD1306 OLED Display and Breadboard 830 Tie Points × 2.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure link quality.
Parts list
- Development BoardsArduino Nano × 2
- Wireless
- Wireless
- Passives
- Displays
- Prototyping
How to build it
- Send numbered packets
- Count the ones received
- Walk away with the receiver
- Compare the two modules
- Plot loss against distance
Related projects
Common questions
What parts do I need for the radio range test?
Arduino Nano × 2, nRF24L01+ Radio Module, NRF24L01+ PA LNA with antenna, Electrolytic Capacitor 100 µF × 2, SSD1306 OLED Display and Breadboard 830 Tie Points × 2.
How long does the radio range test take to build?
About 240 minutes for a intermediate maker.
