Idea
In short
How do you build a loRa garden link?
Two LoRa Ra-02 modules send soil moisture from the far end of a garden to the house. You need Arduino Nano × 2, LoRa SX1278 Ra-02 module (433 MHz) × 2, Capacitive Soil Moisture Module and SSD1306 OLED Display.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Send small readings over a long-range radio link.
Parts list
- Development BoardsArduino Nano × 2
- Wireless
- Sensors
- Displays
How to build it
- Wire the modules over SPI at 3.3 V
- Set a legal frequency and low power
- Send moisture values
- Display at the house
- Test through a wall and over a hedge
Common questions
What parts do I need for the loRa garden link?
Arduino Nano × 2, LoRa SX1278 Ra-02 module (433 MHz) × 2, Capacitive Soil Moisture Module and SSD1306 OLED Display.
How long does the loRa garden link take to build?
About 180 minutes for a intermediate maker.
