Idea
In short
How do you build an I2C speed versus frame rate?
The Nano redraws the whole screen as fast as it can at the standard 100 kilohertz and at the faster 400 kilohertz I2C speed and counts the frames each second, showing how bus speed limits a display. A clear way to see what the clock speed of a bus really means. You need Arduino Nano, SSD1306 OLED Display, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 80 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
See how bus speed changes screen speed.
Parts list
- Development Boards
- Displays
- Switches
- Prototyping
- Prototyping
How to build it
- Redraw the screen in a loop
- Count frames a second
- Switch the bus to 400 kilohertz
- Compare the two frame rates
- Draw a bigger picture and compare again
Common questions
What parts do I need for the I2C speed versus frame rate?
Arduino Nano, SSD1306 OLED Display, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the I2C speed versus frame rate take to build?
About 80 minutes for a intermediate maker.
