Projects / Ideas / Bluetooth data bridge

Bluetooth data bridge

BeginnerCommunicationIdeaReviewed
In short

How do you build a bluetooth data bridge?

A JDY-31 module bridges a sensor board to a phone with plain serial, replacing a cable. You need Arduino Nano, JDY-31 Bluetooth module, Potentiometer 10 kΩ and SSD1306 OLED Display.

Level
Beginner
Time
About 60 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Replace a serial cable with a wireless link.

Parts list

How to build it

  1. Wire the module to serial
  2. Pair with a phone terminal app
  3. Send readings
  4. Receive commands
  5. Check the baud rate

Related projects

Common questions

What parts do I need for the bluetooth data bridge?

Arduino Nano, JDY-31 Bluetooth module, Potentiometer 10 kΩ and SSD1306 OLED Display.

How long does the bluetooth data bridge take to build?

About 60 minutes for a beginner maker.