Components / Wireless / nRF24L01+ Radio Module

nRF24L01+ Radio Module

2.4 GHz transceiver family for embedded data links.

RadionRF24L01+ transceiver, 250 kbps to 2 Mbps
Band2.4 GHz ISM
Typical rangeAbout 30 m indoors with the PCB antenna; PA+LNA versions much more
InterfaceSPI plus CE and IRQ
WirelessReviewedMPN nRF24L01+Used in 15 projects
NRF24L01
In short

What is the nRF24L01+ Radio Module and what is it used for?

2.4 GHz transceiver family for embedded data links. Makers use it for exchange packets between boards.

In the real world

Low-power short range radio prototypes

How it works

RF modules require power, antenna/interface matching and local wireless regulatory compliance.

Key specifications

Wireless module specValue
RadionRF24L01+ transceiver, 250 kbps to 2 Mbps
Band2.4 GHz ISM
Typical rangeAbout 30 m indoors with the PCB antenna; PA+LNA versions much more
InterfaceSPI plus CE and IRQ
Supply voltage1.9 to 3.6 V (never 5 V)
Logic levelInputs are 5 V tolerant

Pinout

GND / VCCGround / 3.3 V
CEChip enable
CSNSPI chip select
SCK / MOSI / MISOSPI
IRQInterrupt (optional)

How to use it

Solder a 10 to 100 µF capacitor right across VCC and GND: most "it does not work" problems are power. The Uno's 3.3 V pin cannot power PA+LNA versions.

#include <RF24.h>
RF24 radio(9, 10); // CE, CSN
const byte addr[6] = "00001";
void setup() { radio.begin(); radio.openWritingPipe(addr); radio.stopListening(); }
void loop() { const char msg[] = "hi"; radio.write(&msg, sizeof(msg)); delay(1000); }

Applications

Alternatives

Buy at

Common questions

What is the nRF24L01+ Radio Module used for?

In products: low-power short range radio prototypes. In maker projects: exchange packets between boards.

How does the nRF24L01+ Radio Module work?

RF modules require power, antenna/interface matching and local wireless regulatory compliance.

What voltage does the nRF24L01+ Radio Module need?

1.9 to 3.6 V (never 5 V).

How do I connect the nRF24L01+ Radio Module to an Arduino or ESP32?

SPI plus CE and IRQ. Pins: GND / VCC (Ground / 3.3 V), CE (Chip enable), CSN (SPI chip select), SCK / MOSI / MISO (SPI), IRQ (Interrupt (optional)).

What can I use instead of the nRF24L01+ Radio Module?

SX1276 LoRa Module and HC-05 Bluetooth Module.