Idea
In short
How do you build a two Nano boards compared?
Run the same blink and sensor sketch on two board types and compare the current each draws on a meter. You need Arduino Nano Every, Arduino Nano, Digital multimeter, USB A to USB-C cable (data) and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Compare board power draw.
Parts list
- Development Boards
- Development Boards
- Tools & Instruments
- Cables & Wires
- Prototyping
How to build it
- Load the same sketch
- Measure idle current
- Measure while blinking
- Add sleep to one
- Compare results
Common questions
What parts do I need for the two Nano boards compared?
Arduino Nano Every, Arduino Nano, Digital multimeter, USB A to USB-C cable (data) and Breadboard 830 Tie Points.
How long does the two Nano boards compared take to build?
About 120 minutes for a beginner maker.
