Idea
In short
How do you build a squat counter?
A motion sensor on a belt counts squats by spotting the lowering and rising and shows the count on a screen, with a beep at the target number. A friendly fitness counter that shows how a motion sensor sees movement. Move within your own comfort and ask a trainer about form, as this is not a coaching device. You need Arduino Nano, MPU6050 IMU, SSD1306 OLED Display, Passive buzzer, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Beginner
- Time
- About 80 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Count squats with a belt sensor.
Parts list
- Development Boards
- Sensors
- Displays
- Motors & Actuators
- Switches
- Prototyping
- Prototyping
How to build it
- Clip the sensor on the belt
- Find the up and down positions
- Count a squat for each full down and up
- Beep at the target
- Show the count and the time
Common questions
What parts do I need for the squat counter?
Arduino Nano, MPU6050 IMU, SSD1306 OLED Display, Passive buzzer, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the squat counter take to build?
About 80 minutes for a beginner maker.
