Projects / Ideas / Model funicular

Model funicular

IntermediateVehiclesIdeaReviewed
In short

How do you build a model funicular?

Two light model cars hang on a loop of string over a stepper-driven pulley, so one climbs as the other descends, and limit switches stop them at the ends. A neat example of balanced weights. Keep fingers clear of the string and pulley. You need Arduino Nano, 28BYJ-48 Stepper Motor, ULN2003 driver board, Limit switch (micro switch with lever) × 2, Tactile push button 6 mm, 5 V 2 A USB adapter, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Intermediate
Time
About 100 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Move two counterbalanced model cars.

How to build it

  1. Hang two cars on a string loop over the pulley
  2. Turn the stepper to move them
  3. Stop at each limit switch
  4. Wait at the ends
  5. Add a call button

Related projects

Common questions

What parts do I need for the model funicular?

Arduino Nano, 28BYJ-48 Stepper Motor, ULN2003 driver board, Limit switch (micro switch with lever) × 2, Tactile push button 6 mm, 5 V 2 A USB adapter, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the model funicular take to build?

About 100 minutes for a intermediate maker.