Idea
In short
How do you build an e-paper weather display that runs for months?
A 2.9-inch e-paper screen shows indoor readings and the day's forecast fetched from an open weather API, waking only every 30 minutes. You need ESP32 DevKit V1, 2.9 inch e-paper display, BME280 Environmental Sensor, 18650 cell 2600 mAh (branded), Battery holder 18650 single and TP4056 module with protection (USB-C).
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use a display that holds its image with no power, and fetch JSON over Wi-Fi.
Parts list
- Development Boards
- Displays
- Sensors
- Batteries
- Power
- Power
How to build it
- Wire the e-paper on SPI
- Fetch the forecast as JSON from Open-Meteo (no key needed)
- Draw temperature, rain chance and indoor readings
- Deep sleep for 30 minutes
- Measure how many weeks one cell lasts
Common questions
What parts do I need for the e-paper weather display that runs for months?
ESP32 DevKit V1, 2.9 inch e-paper display, BME280 Environmental Sensor, 18650 cell 2600 mAh (branded), Battery holder 18650 single and TP4056 module with protection (USB-C).
How long does the e-paper weather display that runs for months take to build?
About 180 minutes for a intermediate maker.
