2.9 inch e-paper display
E-ink screen that keeps its image with no power.
What is the 2.9 inch e-paper display and what is it used for?
E-ink screen that keeps its image with no power. Makers use it for shelf labels, battery dashboards.
Charged black and white pigment particles move in tiny capsules when a voltage is applied, and stay put afterwards.
Key specifications
| Display spec | Value |
|---|---|
| Type | E-paper, black and white |
| Size | 2.9 inch |
| Resolution | 296 × 128 |
| Interface | SPI |
| Supply voltage | 3.3 V |
| Watch out for | Full refresh takes about 2 seconds |
Pinout
How to use it
Use GxEPD2 and pick the class matching your panel. Wait on BUSY, put the panel to sleep after each update and refresh at most every few minutes. The image stays with no power.
Applications
Builds that use it
Alternatives
- 1.54 inch e-paper displaySmaller
- 4.2 inch e-paper displayLarger
Common questions
What is the 2.9 inch e-paper display used for?
In maker projects: shelf labels, battery dashboards.
How does the 2.9 inch e-paper display work?
Charged black and white pigment particles move in tiny capsules when a voltage is applied, and stay put afterwards.
What voltage does the 2.9 inch e-paper display need?
3.3 V.
How do I connect the 2.9 inch e-paper display to an Arduino or ESP32?
SPI. Pins: VCC (3.3 V), GND (Ground), DIN (SPI data), CLK (SPI clock), CS (Chip select), DC (Data or command).
What can I use instead of the 2.9 inch e-paper display?
1.54 inch e-paper display and 4.2 inch e-paper display.
