Projects / Ideas / Thermocouple temperature display

Thermocouple temperature display

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a thermocouple temperature display?

A K-type thermocouple shows temperatures up to several hundred degrees for a toaster-oven reflow experiment, read only. You need Arduino Uno R3, MAX6675 thermocouple module with K-type probe, SSD1306 OLED Display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Intermediate
Time
About 120 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Read a thermocouple safely.

How to build it

  1. Wire the MAX6675 over SPI
  2. Read the probe temperature
  3. Show it on the OLED
  4. Log a heating curve
  5. Keep fingers away and never touch hot surfaces

Related projects

Common questions

What parts do I need for the thermocouple temperature display?

Arduino Uno R3, MAX6675 thermocouple module with K-type probe, SSD1306 OLED Display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the thermocouple temperature display take to build?

About 120 minutes for a intermediate maker.