MAX6675 thermocouple module with K-type probe
Reads a K-type thermocouple up to 1024 °C over SPI.
What is the MAX6675 thermocouple module with K-type probe and what is it used for?
Reads a K-type thermocouple up to 1024 °C over SPI. Makers use it for ovens, kilns, reflow plates.
A thermocouple produces a small voltage from the temperature difference between its tip and its connection; the chip measures it and adds cold-junction compensation.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | High temperature with a K thermocouple |
| Range | 0 to 1024 °C |
| Accuracy | 0.25 °C resolution, about ±2 °C |
| Interface | SPI (read only) |
| Supply voltage | 3 to 5.5 V |
Pinout
How to use it
Use the MAX6675 library and wait at least 250 ms between readings. The thermocouple polarity matters: if the reading falls when heated, swap the wires. Keep the module itself at room temperature.
Applications
Builds that use it
Alternatives
- MAX31855 thermocouple amplifierWider range including below 0 °C
Common questions
What is the MAX6675 thermocouple module with K-type probe used for?
In maker projects: ovens, kilns, reflow plates.
How does the MAX6675 thermocouple module with K-type probe work?
A thermocouple produces a small voltage from the temperature difference between its tip and its connection; the chip measures it and adds cold-junction compensation.
What voltage does the MAX6675 thermocouple module with K-type probe need?
3 to 5.5 V.
How do I connect the MAX6675 thermocouple module with K-type probe to an Arduino or ESP32?
SPI (read only). Pins: GND (Ground), VCC (3 to 5.5 V), SCK (SPI clock), CS (Chip select), SO (Data out), + and − (Thermocouple screw terminals (yellow is usually +)).
What can I use instead of the MAX6675 thermocouple module with K-type probe?
MAX31855 thermocouple amplifier.
