Projects / Ideas / Precision RTD thermometer

Precision RTD thermometer

AdvancedTest & MeasurementIdeaReviewed
In short

How do you build a precision RTD thermometer?

A PT100 probe and MAX31865 give accurate temperatures for comparing against cheaper sensors. You need ESP32 DevKit V1, MAX31865 RTD amplifier (PT100), DS18B20 Temperature Sensor, Resistor 4.7 kΩ, SSD1306 OLED Display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Advanced
Time
About 240 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Compare sensor accuracy.

How to build it

  1. Wire the RTD amplifier over SPI
  2. Read temperature
  3. Add a DS18B20 beside it
  4. Compare in ice water and warm water
  5. Log the difference

Related projects

Common questions

What parts do I need for the precision RTD thermometer?

ESP32 DevKit V1, MAX31865 RTD amplifier (PT100), DS18B20 Temperature Sensor, Resistor 4.7 kΩ, SSD1306 OLED Display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the precision RTD thermometer take to build?

About 240 minutes for a advanced maker.