Projects / Ideas / Three-rail power monitor

Three-rail power monitor

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a three-rail power monitor?

An INA3221 watches three supply rails in a project and shows each voltage and current on a screen. You need ESP32 DevKit V1, INA3221 3-channel current monitor, Shunt resistor 0.1 Ω 2 W × 3 and SSD1306 OLED Display.

Level
Intermediate
Time
About 120 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Monitor several rails at once.

How to build it

  1. Wire three shunts in the positive lines
  2. Read bus and shunt voltages
  3. Compute current and power
  4. Show all three rails
  5. Log when a rail sags

Related projects

Common questions

What parts do I need for the three-rail power monitor?

ESP32 DevKit V1, INA3221 3-channel current monitor, Shunt resistor 0.1 Ω 2 W × 3 and SSD1306 OLED Display.

How long does the three-rail power monitor take to build?

About 120 minutes for a intermediate maker.