Projects / Ideas / Step and tilt badge

Step and tilt badge

IntermediateWearablesIdeaReviewed
In short

How do you build a step and tilt badge?

A six-axis sensor with built-in step counting shows steps and tilt on a small screen. You need Arduino Nano, LSM6DS3 6-axis IMU, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use a sensor's built-in features.

How to build it

  1. Enable the step counter
  2. Read the count
  3. Show tilt
  4. Reset with a button
  5. Compare with a manual count

Related projects

Common questions

What parts do I need for the step and tilt badge?

Arduino Nano, LSM6DS3 6-axis IMU, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.

How long does the step and tilt badge take to build?

About 210 minutes for a intermediate maker.