Components / Sensors / LSM6DS3 6-axis IMU

LSM6DS3 6-axis IMU

Accelerometer and gyro with a step counter built in.

MeasuresAcceleration and rotation
InterfaceI2C or SPI
I2C address0x6A or 0x6B
Supply voltage1.71 to 3.6 V
SensorsReviewedMPN LSM6DS3Used in 3 projects
LSM6DS3
In short

What is the LSM6DS3 6-axis IMU and what is it used for?

Accelerometer and gyro with a step counter built in. Makers use it for wearables, step counters.

How it works

A low-power MEMS accelerometer and gyroscope with built-in motion functions.

Key specifications

Sensor specValue
MeasuresAcceleration and rotation
InterfaceI2C or SPI
I2C address0x6A or 0x6B
Supply voltage1.71 to 3.6 V

Pinout

VIN3.3 to 5 V on modules
GNDGround
SCLI2C or SPI clock
SDAI2C data or SPI
SDOAddress 0x6A or 0x6B
CSHigh for I2C
INT1 and INT2Interrupts

How to use it

Use the Arduino LSM6DS3 or SparkFun library. Its step counter and tap detection run on the chip, so the microcontroller can sleep.

Applications

Alternatives

Common questions

What is the LSM6DS3 6-axis IMU used for?

In maker projects: wearables, step counters.

How does the LSM6DS3 6-axis IMU work?

A low-power MEMS accelerometer and gyroscope with built-in motion functions.

What voltage does the LSM6DS3 6-axis IMU need?

1.71 to 3.6 V.

How do I connect the LSM6DS3 6-axis IMU to an Arduino or ESP32?

I2C or SPI. Pins: VIN (3.3 to 5 V on modules), GND (Ground), SCL (I2C or SPI clock), SDA (I2C data or SPI), SDO (Address 0x6A or 0x6B), CS (High for I2C).

What can I use instead of the LSM6DS3 6-axis IMU?

MPU6050 IMU.