Idea
In short
How do you build a two-node radio range test?
Two boards with LoRa radios send small packets, and you record signal strength at different distances on a walk, within local rules. You need Arduino Nano × 2, LoRa SX1278 Ra-02 module (433 MHz) × 2, SSD1306 OLED Display and Breadboard 830 Tie Points × 2.
- Level
- Advanced
- Time
- About 330 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Test radio range.
Parts list
- Development BoardsArduino Nano × 2
- Wireless
- Displays
- Prototyping
How to build it
- Wire both radios
- Send a counter
- Show signal strength
- Walk and record readings
- Plot strength against distance
Related projects
Common questions
What parts do I need for the two-node radio range test?
Arduino Nano × 2, LoRa SX1278 Ra-02 module (433 MHz) × 2, SSD1306 OLED Display and Breadboard 830 Tie Points × 2.
How long does the two-node radio range test take to build?
About 330 minutes for a advanced maker.
