Projects / Ideas / Inductance meter with a comparator oscillator

Inductance meter with a comparator oscillator

AdvancedTest & MeasurementIdeaReviewed
In short

How do you build an inductance meter with a comparator oscillator?

A comparator oscillator whose frequency depends on an unknown coil lets a board measure inductance from the frequency. You need LM393 Comparator, Arduino Nano, Ceramic capacitor 1 nF, Ceramic Capacitor 100 nF, Resistor 10 kΩ × 3, SSD1306 OLED Display, Inductor 100 µH, Inductor 1 mH and Breadboard 830 Tie Points.

Level
Advanced
Time
About 300 min
Parts
9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Measure inductance from frequency.

Parts list

How to build it

  1. Build the oscillator
  2. Count its frequency with the Nano
  3. Calibrate with a known coil
  4. Calculate the unknown from the frequency
  5. Show the result

Related projects

Common questions

What parts do I need for the inductance meter with a comparator oscillator?

LM393 Comparator, Arduino Nano, Ceramic capacitor 1 nF, Ceramic Capacitor 100 nF, Resistor 10 kΩ × 3, SSD1306 OLED Display, Inductor 100 µH, Inductor 1 mH and Breadboard 830 Tie Points.

How long does the inductance meter with a comparator oscillator take to build?

About 300 minutes for a advanced maker.