Idea
In short
How do you build a battery gauge bar?
An LM3914 lights a ten LED bar showing the charge of a 12 V lead acid battery. You need LM3914 bar graph driver, LED 5 mm red × 10, Resistor 1 kΩ × 2, Potentiometer 10 kΩ, 12 V 7 Ah sealed lead acid battery and Zener diode 9.1 V (1N4739A).
- Level
- Beginner
- Time
- About 90 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use a bar graph driver as a gauge.
Parts list
- Integrated Circuits
- SemiconductorsLED 5 mm red × 10
- PassivesResistor 1 kΩ × 2
- Passives
- Batteries
- Semiconductors
How to build it
- Set the low and high reference voltages
- Wire the LEDs
- Calibrate with a bench supply
- Fit it near the battery
- Check the voltages of a full and flat battery
Common questions
What parts do I need for the battery gauge bar?
LM3914 bar graph driver, LED 5 mm red × 10, Resistor 1 kΩ × 2, Potentiometer 10 kΩ, 12 V 7 Ah sealed lead acid battery and Zener diode 9.1 V (1N4739A).
How long does the battery gauge bar take to build?
About 90 minutes for a beginner maker.
