Idea
In short
How do you build an end stop with a roller switch?
A roller lever switch stops a small servo arm at the end of its travel, and a second press sends it home. You need Arduino Nano, Micro switch with roller lever, SG90 Micro Servo, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Stop a mechanism with an end stop.
Parts list
- Development Boards
- Switches
- Motors & Actuators
- Switches
- Prototyping
How to build it
- Wire the switch with the pull-up
- Move the servo slowly
- Stop when the switch closes
- Reverse to the start
- Count the cycles
Related projects
Common questions
What parts do I need for the end stop with a roller switch?
Arduino Nano, Micro switch with roller lever, SG90 Micro Servo, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the end stop with a roller switch take to build?
About 120 minutes for a beginner maker.
