Projects / Ideas / Animatronic eye

Animatronic eye

IntermediateRoboticsIdeaReviewed
In short

How do you build an animatronic eye?

Two servos move a model eyeball left, right, up and down under joystick control, and a third servo works a blinking eyelid that also blinks by itself every few seconds. A fun first step into animatronics. Power the servos separately and keep the mechanism light. You need Arduino Nano, SG90 Micro Servo × 3, Joystick module (dual axis), Battery holder 4 × AA with switch, AA alkaline battery × 4, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Intermediate
Time
About 100 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Move a model eye and blink its lid.

How to build it

  1. Read the two joystick axes
  2. Map them to the two eye servos
  3. Blink the lid on a timer
  4. Add a random blink interval
  5. Smooth the movement

Related projects

Common questions

What parts do I need for the animatronic eye?

Arduino Nano, SG90 Micro Servo × 3, Joystick module (dual axis), Battery holder 4 × AA with switch, AA alkaline battery × 4, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the animatronic eye take to build?

About 100 minutes for a intermediate maker.