Idea
In short
How do you build a big servo sweep tester?
A knob sets the angle of a large metal-gear servo on its own power supply, and a button runs a slow sweep to test the range. You need Arduino Nano, MG995 servo, Potentiometer 10 kΩ, Tactile push button 6 mm, Electrolytic Capacitor 100 µF, Micro USB breakout board, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Test a big servo safely.
Parts list
- Development Boards
- Motors & Actuators
- Passives
- Switches
- Passives
- Connectors
- Power
- Prototyping
How to build it
- Power the servo separately
- Share the ground
- Map the knob to angle
- Add a sweep button
- Find the safe range
Related projects
Common questions
What parts do I need for the big servo sweep tester?
Arduino Nano, MG995 servo, Potentiometer 10 kΩ, Tactile push button 6 mm, Electrolytic Capacitor 100 µF, Micro USB breakout board, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
How long does the big servo sweep tester take to build?
About 150 minutes for a beginner maker.
