Idea
In short
How do you build a pocket scope on a T-Display?
A LilyGO T-Display samples an input and draws it as a basic oscilloscope trace with a trigger. You need LilyGO T-Display ESP32, Resistor 100 kΩ × 2, Resistor 10 kΩ, Ceramic Capacitor 100 nF and Tactile push button 6 mm × 2.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Sample fast and display a waveform with a trigger.
Parts list
- Development Boards
- PassivesResistor 100 kΩ × 2
- Passives
- Passives
- Switches
How to build it
- Divide the input into the ADC range
- Sample into a buffer
- Find a rising-edge trigger
- Draw the trace
- Add time and volts per division
Common questions
What parts do I need for the pocket scope on a T-Display?
LilyGO T-Display ESP32, Resistor 100 kΩ × 2, Resistor 10 kΩ, Ceramic Capacitor 100 nF and Tactile push button 6 mm × 2.
How long does the pocket scope on a T-Display take to build?
About 180 minutes for a intermediate maker.
