Projects / Ideas / Workshop machine access control

Workshop machine access control

IntermediateIndustrialIdeaReviewed
In short

How do you build a workshop machine access control?

An RFID reader only lets trained members switch on a workshop machine and logs who used it. You need ESP32 DevKit V1, RC522 RFID reader, RFID tags 13.56 MHz (MIFARE Classic 1K) × 5, Relay Module 5V, 16x2 LCD with I2C backpack (PCF8574) and Active buzzer 5 V.

Level
Intermediate
Time
About 180 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Control access and log use.

How to build it

  1. Store trained members' tags
  2. Switch on the machine contactor control only for them
  3. Log start and stop
  4. Time out after use
  5. Leave contactor wiring to an electrician

Related projects

Common questions

What parts do I need for the workshop machine access control?

ESP32 DevKit V1, RC522 RFID reader, RFID tags 13.56 MHz (MIFARE Classic 1K) × 5, Relay Module 5V, 16x2 LCD with I2C backpack (PCF8574) and Active buzzer 5 V.

How long does the workshop machine access control take to build?

About 180 minutes for a intermediate maker.