L293D motor driver shield for Uno
Uno shield that drives four DC motors or two steppers plus two servos.
What is the L293D motor driver shield for Uno and what is it used for?
Uno shield that drives four DC motors or two steppers plus two servos. Makers use it for robot cars on an Uno.
A 74HC595 shift register sets the direction lines of two L293D H-bridge chips, and four PWM pins set the speeds.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | 4 DC motors or 2 steppers with two L293D chips and a 74HC595 |
| Supply voltage | 4.5 to 25 V motor supply |
| Interface | Uno pins via the shield |
| Rating | About 0.6 A per channel |
| Logic level | 5 V |
Pinout
How to use it
Use the AFMotor library (Adafruit Motor Shield v1). Power motors from EXT_PWR and remove the PWR jumper so the motor supply is kept off the Uno. The L293D drops about 2 V and gets hot above about 0.6 A, so use small motors.
Applications
Builds that use it
Alternatives
- L298N Dual H-Bridge ModuleMore current for two motors
- TB6612FNG Motor DriverEfficient, little heat
Common questions
What is the L293D motor driver shield for Uno used for?
In maker projects: robot cars on an Uno.
How does the L293D motor driver shield for Uno work?
A 74HC595 shift register sets the direction lines of two L293D H-bridge chips, and four PWM pins set the speeds.
What voltage does the L293D motor driver shield for Uno need?
4.5 to 25 V motor supply.
How do I connect the L293D motor driver shield for Uno to an Arduino or ESP32?
Uno pins via the shield. Pins: M1 M2 M3 M4 (DC motor terminals (or two steppers on M1 M2 and M3 M4)), SERVO1 SERVO2 (Servo headers on pins 10 and 9), EXT_PWR (Motor supply terminal), PWR jumper (Remove when using a separate motor supply), Pins used (3 4 5 6 7 8 11 12), Free pins (A0 to A5, 2 and 13).
What can I use instead of the L293D motor driver shield for Uno?
L298N Dual H-Bridge Module and TB6612FNG Motor Driver.
