Idea
In short
How do you build a square-wave inverter demonstration?
A low-power 12 V inverter with a CD4047 and MOSFETs drives a small transformer to show how inverters make AC. You need CD4060 counter and oscillator, IRFZ44N N-channel MOSFET × 2, Resistor 10 kΩ × 2, Ceramic Capacitor 100 nF and 12 V 2 A DC adapter.
- Level
- Advanced
- Time
- About 300 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Generate two out-of-phase square waves and drive a centre-tapped transformer.
Parts list
- Integrated CircuitsA CD4047 is the classic choice
- Semiconductors
- PassivesResistor 10 kΩ × 2
- Passives
- Power
How to build it
- Make two 50 Hz out-of-phase drive signals
- Drive the MOSFETs into each half of a centre-tapped transformer primary
- Measure the waveform on the low-voltage side only
- Understand why it is a square wave, not a sine
- The output can be lethal: keep it under supervision and never touch it
Common questions
What parts do I need for the square-wave inverter demonstration?
CD4060 counter and oscillator, IRFZ44N N-channel MOSFET × 2, Resistor 10 kΩ × 2, Ceramic Capacitor 100 nF and 12 V 2 A DC adapter. CD4060 counter and oscillator: A CD4047 is the classic choice.
How long does the square-wave inverter demonstration take to build?
About 300 minutes for a advanced maker.
