Projects / Ideas / Two-link arm that draws with inverse kinematics

Two-link arm that draws with inverse kinematics

AdvancedMotionIdeaReviewed
In short

How do you build a two-link arm that draws with inverse kinematics?

Two servos form a planar arm that moves a pen to x, y points worked out with inverse kinematics, drawing simple shapes. You need Arduino Uno R3, MG996R metal gear servo × 2, SG90 Micro Servo, Battery holder 4 × AA with switch, AA alkaline battery × 4 and Electrolytic capacitor 1000 µF.

Level
Advanced
Time
About 240 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Solve two-link inverse kinematics and convert angles to servo positions.

Parts list

How to build it

  1. Build two arm links of known length
  2. Solve the elbow angle with the law of cosines
  3. Solve the shoulder angle from atan2
  4. Lift the pen with the third servo between strokes
  5. Draw a square, then a circle from 36 points

Related projects

Common questions

What parts do I need for the two-link arm that draws with inverse kinematics?

Arduino Uno R3, MG996R metal gear servo × 2, SG90 Micro Servo, Battery holder 4 × AA with switch, AA alkaline battery × 4 and Electrolytic capacitor 1000 µF.

How long does the two-link arm that draws with inverse kinematics take to build?

About 240 minutes for a advanced maker.