Idea
In short
How do you build a scoreboard on an RGB panel?
A large RGB LED panel shows team scores set with a keypad, for a club or school. You need ESP32 DevKit V1, HUB75 RGB LED matrix 64x32 (P4), 4x4 matrix keypad (membrane) and 5 V 2 A USB adapter.
- Level
- Advanced
- Time
- About 360 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Drive a HUB75 panel.
Parts list
- Development Boards
- Displays
- Switches
- Power
How to build it
- Check the power needed for the panel
- Wire the panel to the board
- Draw digits
- Read the keypad
- Add a timer
Common questions
What parts do I need for the scoreboard on an RGB panel?
ESP32 DevKit V1, HUB75 RGB LED matrix 64x32 (P4), 4x4 matrix keypad (membrane) and 5 V 2 A USB adapter.
How long does the scoreboard on an RGB panel take to build?
About 360 minutes for a advanced maker.
