Idea
In short
How do you build an RGB matrix GIF player?
A 64 × 32 HUB75 RGB panel plays animated GIFs from an SD card or shows a clock and weather. You need ESP32 DevKit V1, HUB75 RGB LED matrix 64x32 (P4), MicroSD Card Module, SanDisk microSD card 32 GB (A1, Class 10) and 5 V 3 A USB buck module (12/24 V to USB).
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Drive a fast-refresh RGB panel with DMA.
Parts list
- Development Boards
- Displays
- Interfaces
- SBC Accessories
- PowerUse a 5 V 4 A supply
How to build it
- Wire the HUB75 connector to the ESP32
- Use a DMA matrix library
- Decode GIFs from SD
- Add a clock mode
- Watch the current at full white
Common questions
What parts do I need for the RGB matrix GIF player?
ESP32 DevKit V1, HUB75 RGB LED matrix 64x32 (P4), MicroSD Card Module, SanDisk microSD card 32 GB (A1, Class 10) and 5 V 3 A USB buck module (12/24 V to USB). 5 V 3 A USB buck module (12/24 V to USB): Use a 5 V 4 A supply.
How long does the RGB matrix GIF player take to build?
About 240 minutes for a intermediate maker.
