HUB75 RGB LED matrix 64x32 (P4)
Full-colour LED panel driven from an ESP32 or Pi.
What is the HUB75 RGB LED matrix 64x32 (P4) and what is it used for?
Full-colour LED panel driven from an ESP32 or Pi. Makers use it for big colour signs.
The controller shifts colour data in for two rows at a time and scans 16 row pairs fast enough to look steady.
Key specifications
| Display spec | Value |
|---|---|
| Type | RGB LED matrix |
| Resolution | 64 × 32 |
| Interface | HUB75 |
| Supply voltage | 5 V, up to about 4 A |
Pinout
How to use it
Use the ESP32-HUB75-MatrixPanel-DMA library on an ESP32 or rpi-rgb-led-matrix on a Pi. Give it its own 5 V 4 A supply. Panels use different scan rates and chips, so check the listing.
Applications
Builds that use it
Alternatives
- P10 LED matrix panel (32x16, red)Single colour, simpler
- WS2812B 8x8 RGB LED matrixSmall addressable matrix
Common questions
What is the HUB75 RGB LED matrix 64x32 (P4) used for?
In maker projects: big colour signs.
How does the HUB75 RGB LED matrix 64x32 (P4) work?
The controller shifts colour data in for two rows at a time and scans 16 row pairs fast enough to look steady.
What voltage does the HUB75 RGB LED matrix 64x32 (P4) need?
5 V, up to about 4 A.
How do I connect the HUB75 RGB LED matrix 64x32 (P4) to an Arduino or ESP32?
HUB75. Pins: R1 G1 B1 R2 G2 B2 (Colour data), A B C D (Row select), CLK (Clock), LAT (Latch), OE (Output enable), GND (Ground).
What can I use instead of the HUB75 RGB LED matrix 64x32 (P4)?
P10 LED matrix panel (32x16, red) and WS2812B 8x8 RGB LED matrix.
