Idea
In short
How do you build a retro-style clock with LED filaments?
LED filament bulbs in glass tubes show time digits with a warm retro look at low voltage. You need ESP32 DevKit V1, LED filament 3 V (flexible) × 14, 74HC595 Shift Register × 2, ULN2003A Darlington array IC × 2, DS3231 RTC module and 5 V 2 A USB adapter.
- Level
- Intermediate
- Time
- About 360 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make a retro display with safe voltages.
Parts list
- Development Boards
- Optoelectronics
- Integrated Circuits
- Integrated Circuits
- Sensors
- Power
How to build it
- Shape filaments into digits
- Drive with ULN2003
- Multiplex through shift registers
- Sync with NTP
- Dim at night
Common questions
What parts do I need for the retro-style clock with LED filaments?
ESP32 DevKit V1, LED filament 3 V (flexible) × 14, 74HC595 Shift Register × 2, ULN2003A Darlington array IC × 2, DS3231 RTC module and 5 V 2 A USB adapter.
How long does the retro-style clock with LED filaments take to build?
About 360 minutes for a intermediate maker.
