Idea
In short
How do you build a hidden magnet puzzle box?
A small box opens only when you touch a small magnet to three hidden spots in the right order, and then a servo slides the catch. It is a fun puzzle for a family or a club. It is a toy and is not a security lock. You need Arduino Nano, Hall Effect Sensor A3144 × 3, SG90 Micro Servo, LED 5 mm red, Resistor 220 Ω, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 100 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Open a puzzle box with a magnet code.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Semiconductors
- Passives
- Prototyping
- Prototyping
How to build it
- Fix three sensors behind the lid at hidden spots
- Read the order they trigger
- Check it against the secret
- Move the servo to open the catch
- Reset after a wrong order
Common questions
What parts do I need for the hidden magnet puzzle box?
Arduino Nano, Hall Effect Sensor A3144 × 3, SG90 Micro Servo, LED 5 mm red, Resistor 220 Ω, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the hidden magnet puzzle box take to build?
About 100 minutes for a intermediate maker.
