Projects / Ideas / Safe dial combination box

Safe dial combination box

BeginnerGames & ToysIdeaReviewed
In short

How do you build a safe dial combination box?

Turn a rotary encoder left and right through a three-number combination and a small servo opens the lid of a toy treasure box. It has the click and feel of an old safe dial. It is a toy, not a security lock. You need Arduino Nano, Rotary encoder module (KY-040), SG90 Micro Servo, SSD1306 OLED Display, Passive buzzer, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Beginner
Time
About 110 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Open a toy box with a dial combination.

How to build it

  1. Wire the encoder, servo and display
  2. Count turns left and right
  3. Check a three-number combination
  4. Move the servo to open the lid
  5. Beep on a wrong try

Related projects

Common questions

What parts do I need for the safe dial combination box?

Arduino Nano, Rotary encoder module (KY-040), SG90 Micro Servo, SSD1306 OLED Display, Passive buzzer, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the safe dial combination box take to build?

About 110 minutes for a beginner maker.