Idea
In short
How do you build a mini quadruped robot dog?
Eight micro servos make a small four-legged robot that walks, sits and waves, using a creep gait and inverse kinematics per leg. You need ESP32 DevKit V1, PCA9685 16-channel servo driver, MG90S metal gear micro servo × 8, Li-Po 2S 7.4 V 2200 mAh 25C (RC), XL4015 5 A buck converter module and 3D printer PLA filament 1.75 mm (1 kg).
- Level
- Advanced
- Time
- About 600 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Plan leg motions with two-joint inverse kinematics.
Parts list
- Development Boards
- Motor Drivers
- Motors & Actuators
- Batteries
- Power
- Tools & Instruments
How to build it
- Print a frame with two servos per leg
- Find each servo's centre and direction
- Solve each leg's hip and knee angles for a foot position
- Move one leg at a time (creep gait)
- Add sit and wave poses
Common questions
What parts do I need for the mini quadruped robot dog?
ESP32 DevKit V1, PCA9685 16-channel servo driver, MG90S metal gear micro servo × 8, Li-Po 2S 7.4 V 2200 mAh 25C (RC), XL4015 5 A buck converter module and 3D printer PLA filament 1.75 mm (1 kg).
How long does the mini quadruped robot dog take to build?
About 600 minutes for a advanced maker.
