Idea
In short
How do you build a snake robot?
Eight servos in a chain move in a travelling wave to slither along the floor. You need ESP32 DevKit V1, MG90S metal gear micro servo × 8, PCA9685 16-channel servo driver, Li-Po 2S 7.4 V 2200 mAh 25C (RC) and LM2596 Buck Module.
- Level
- Advanced
- Time
- About 480 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Coordinate many joints.
Parts list
- Development Boards
- Motors & Actuators
- Motor Drivers
- Batteries
- Power
How to build it
- Print linked segments
- Drive each servo with a phase offset
- Change wave speed and amplitude
- Steer with an offset
- Add wheels for friction
Common questions
What parts do I need for the snake robot?
ESP32 DevKit V1, MG90S metal gear micro servo × 8, PCA9685 16-channel servo driver, Li-Po 2S 7.4 V 2200 mAh 25C (RC) and LM2596 Buck Module.
How long does the snake robot take to build?
About 480 minutes for a advanced maker.
