Projects / Ideas / Vibrating compass model

Vibrating compass model

AdvancedWearablesIdeaReviewed
In short

How do you build a vibrating compass model?

Four small motors around a strap buzz on the side that faces north, a model of a haptic compass belt. You need Arduino Nano, HMC5883L / QMC5883L compass module, Vibration motor (coin type) × 4, NPN Transistor 2N2222 × 4, Resistor 1 kΩ × 4, Rectifier Diode 1N4007 × 4, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.

Level
Advanced
Time
About 330 min
Parts
9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Give direction by touch.

Parts list

How to build it

  1. Read the heading
  2. Wire four motor drivers
  3. Pick the motor facing north
  4. Pulse softly
  5. Add a mute button

Related projects

Common questions

What parts do I need for the vibrating compass model?

Arduino Nano, HMC5883L / QMC5883L compass module, Vibration motor (coin type) × 4, NPN Transistor 2N2222 × 4, Resistor 1 kΩ × 4, Rectifier Diode 1N4007 × 4, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.

How long does the vibrating compass model take to build?

About 330 minutes for a advanced maker.