Projects / Ideas / Geofence alert tag

Geofence alert tag

AdvancedIoTIdeaReviewed
In short

How do you build a geofence alert tag?

A GPS tag on a bag or bike sends an alert when it leaves a set circle, with a clear note about legal and privacy use. You need ESP32 DevKit V1, ATGM336H GPS module, Li-Po battery 3.7 V 2000 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.

Level
Advanced
Time
About 330 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Check a position against a boundary.

How to build it

  1. Read the position
  2. Store a centre and radius
  3. Compute the distance
  4. Alert on leaving
  5. Save power with sleep between fixes

Related projects

Common questions

What parts do I need for the geofence alert tag?

ESP32 DevKit V1, ATGM336H GPS module, Li-Po battery 3.7 V 2000 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.

How long does the geofence alert tag take to build?

About 330 minutes for a advanced maker.