Components / Sensors / ATGM336H GPS module

ATGM336H GPS module

Low-cost GPS and BeiDou module, an alternative to the NEO-6M.

MeasuresPosition, time
InterfaceUART 9600 baud
Supply voltage3.3 to 5 V
SensorsReviewedMPN ATGM336HUsed in 6 projects
ATGM336H
In short

What is the ATGM336H GPS module and what is it used for?

Low-cost GPS and BeiDou module, an alternative to the NEO-6M. Makers use it for budget trackers.

How it works

A multi-constellation GNSS receiver with a small patch antenna.

Key specifications

Sensor specValue
MeasuresPosition, time
InterfaceUART 9600 baud
Supply voltage3.3 to 5 V

Pinout

VCC3.3 to 5 V
GNDGround
TXUART out
RXUART in
PPSPulse per second

How to use it

Read NMEA at 9600 baud with TinyGPSPlus. It is a small, low-cost alternative to the NEO-6M with similar wiring.

Applications

Alternatives

Common questions

What is the ATGM336H GPS module used for?

In maker projects: budget trackers.

How does the ATGM336H GPS module work?

A multi-constellation GNSS receiver with a small patch antenna.

What voltage does the ATGM336H GPS module need?

3.3 to 5 V.

How do I connect the ATGM336H GPS module to an Arduino or ESP32?

UART 9600 baud. Pins: VCC (3.3 to 5 V), GND (Ground), TX (UART out), RX (UART in), PPS (Pulse per second).

What can I use instead of the ATGM336H GPS module?

GPS module NEO-6M.