Projects / Ideas / 4G remote site monitor

4G remote site monitor

IntermediateIoTIdeaReviewed
In short

How do you build a 4G remote site monitor?

A farm or tower site with no Wi-Fi sends readings over 4G and lets you switch a relay remotely. You need ESP32 DevKit V1, SIM7600 4G LTE module, Relay Module 5V, DHT22 Sensor, Resistor 10 kΩ, 12 V 2 A DC adapter and LM2596 Buck Module.

Level
Intermediate
Time
About 240 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use cellular data for IoT where there is no Wi-Fi.

How to build it

  1. Bring up the 4G data connection
  2. Publish readings over MQTT
  3. Subscribe to a control topic
  4. Reconnect after signal drops
  5. Count data use

Related projects

Common questions

What parts do I need for the 4G remote site monitor?

ESP32 DevKit V1, SIM7600 4G LTE module, Relay Module 5V, DHT22 Sensor, Resistor 10 kΩ, 12 V 2 A DC adapter and LM2596 Buck Module.

How long does the 4G remote site monitor take to build?

About 240 minutes for a intermediate maker.