Idea
In short
How do you build an ESP32 tilt dial on a web page?
An ESP32 reads an MPU6050 and serves a web page with a dial that follows the board tilt. Works only when the board is held still. You need ESP32 DevKit V1, MPU6050 IMU and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 170 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Show tilt on a live web dial.
Parts list
- Development Boards
- Sensors
- Prototyping
How to build it
- Read the accelerometer over I2C
- Compute the tilt angle
- Smooth the value
- Serve a page with a dial
- Update the dial several times a second
Common questions
What parts do I need for the ESP32 tilt dial on a web page?
ESP32 DevKit V1, MPU6050 IMU and Breadboard 830 Tie Points.
How long does the ESP32 tilt dial on a web page take to build?
About 170 minutes for a intermediate maker.
