Projects / Ideas / Filter sweep with a function generator

Filter sweep with a function generator

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a filter sweep with a function generator?

Sweep a generator across frequency and plot how an RC filter lets signals through, a hands-on look at cut-off. You need Function generator (DDS), USB oscilloscope / handheld scope (DSO138), Resistor 10 kΩ, Ceramic Capacitor 100 nF and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 240 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Measure a filter's response.

How to build it

  1. Build a low-pass filter
  2. Feed a sine
  3. Measure output at several frequencies
  4. Plot gain against frequency
  5. Find the corner frequency

Related projects

Common questions

What parts do I need for the filter sweep with a function generator?

Function generator (DDS), USB oscilloscope / handheld scope (DSO138), Resistor 10 kΩ, Ceramic Capacitor 100 nF and Breadboard 830 Tie Points.

How long does the filter sweep with a function generator take to build?

About 240 minutes for a intermediate maker.