Projects / Ideas / Diode speed on a scope

Diode speed on a scope

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a diode speed on a scope?

Compare how fast a fast-recovery diode and an ordinary diode stop conducting, using a small square wave and a scope. You need FR107 fast recovery diode, UF4007 ultrafast diode, Rectifier Diode 1N4007, Resistor 1 kΩ, Function generator (DDS), USB oscilloscope / handheld scope (DSO138) and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 240 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

See reverse recovery.

How to build it

  1. Build the test jig
  2. Feed a square wave
  3. Capture the 1N4007
  4. Capture the fast diodes
  5. Compare the tails

Related projects

Common questions

What parts do I need for the diode speed on a scope?

FR107 fast recovery diode, UF4007 ultrafast diode, Rectifier Diode 1N4007, Resistor 1 kΩ, Function generator (DDS), USB oscilloscope / handheld scope (DSO138) and Breadboard 830 Tie Points.

How long does the diode speed on a scope take to build?

About 240 minutes for a intermediate maker.