Projects / Ideas / First waveforms on a pocket scope

First waveforms on a pocket scope

BeginnerTest & MeasurementIdeaReviewed
In short

How do you build a first waveforms on a pocket scope?

A beginner's lab on a small scope: measure a square wave, a sine from a generator and your own board's PWM. You need USB oscilloscope / handheld scope (DSO138), Function generator (DDS), Arduino Nano, Resistor 1 kΩ and Breadboard 830 Tie Points.

Level
Beginner
Time
About 150 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Learn to read a scope.

Parts list

How to build it

  1. Probe the calibration signal
  2. Set time and volts per division
  3. Measure a generator sine
  4. Measure a PWM pin
  5. Read frequency and duty

Related projects

Common questions

What parts do I need for the first waveforms on a pocket scope?

USB oscilloscope / handheld scope (DSO138), Function generator (DDS), Arduino Nano, Resistor 1 kΩ and Breadboard 830 Tie Points.

How long does the first waveforms on a pocket scope take to build?

About 150 minutes for a beginner maker.