Components / Interface and audio modules / ESP32-CAM-MB programmer board

ESP32-CAM-MB programmer board

Carrier with USB for programming the ESP32-CAM.

FunctionUSB to UART with auto-reset
Supply voltageUSB
InterfacePlugs under the ESP32-CAM
InterfacesReviewedMPN ESP32-CAM-MBUsed in 6 projects
ESP32
In short

What is the ESP32-CAM-MB programmer board and what is it used for?

Carrier with USB for programming the ESP32-CAM. Makers use it for programming ESP32-CAM.

How it works

A CH340 USB-serial converter with auto-reset wiring and a regulator.

Key specifications

Interface module specValue
FunctionUSB to UART with auto-reset
Supply voltageUSB
InterfacePlugs under the ESP32-CAM

Pinout

SocketESP32-CAM plugs on top
IO0Boot button
RSTReset
Micro-USBCH340 serial

How to use it

Plug the ESP32-CAM in, choose AI Thinker ESP32-CAM and upload. If it will not enter flash mode, hold IO0 and tap RST.

Applications

Alternatives

Buy at

Common questions

What is the ESP32-CAM-MB programmer board used for?

In maker projects: programming ESP32-CAM.

How does the ESP32-CAM-MB programmer board work?

A CH340 USB-serial converter with auto-reset wiring and a regulator.

What voltage does the ESP32-CAM-MB programmer board need?

USB.

How do I connect the ESP32-CAM-MB programmer board to an Arduino or ESP32?

Plugs under the ESP32-CAM. Pins: Socket (ESP32-CAM plugs on top), IO0 (Boot button), RST (Reset), Micro-USB (CH340 serial).

What can I use instead of the ESP32-CAM-MB programmer board?

ESP32-CAM and USB to TTL serial adapter (CP2102).