Idea
In short
How do you build a fingerprint attendance system?
Enrol fingerprints and log attendance with time to SD and a cloud sheet. You need ESP32 DevKit V1, AS608 fingerprint sensor, DS3231 RTC module, MicroSD Card Module, SanDisk microSD card 32 GB (A1, Class 10), 16x2 LCD with I2C backpack (PCF8574) and Active buzzer 5 V.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use a fingerprint sensor with a database.
Parts list
- Development Boards
- Sensors
- Sensors
- Interfaces
- SBC Accessories
- Displays
- Motors & Actuators
How to build it
- Enrol each person
- Match fingerprints
- Log time and ID
- Upload to a sheet
- Protect stored templates
Common questions
What parts do I need for the fingerprint attendance system?
ESP32 DevKit V1, AS608 fingerprint sensor, DS3231 RTC module, MicroSD Card Module, SanDisk microSD card 32 GB (A1, Class 10), 16x2 LCD with I2C backpack (PCF8574) and Active buzzer 5 V.
How long does the fingerprint attendance system take to build?
About 240 minutes for a intermediate maker.
