Idea
In short
How do you build a fingerprint voting machine model?
A classroom demo verifies a voter by fingerprint and records an anonymous count. You need Arduino Mega 2560 R3, AS608 fingerprint sensor, Tactile push button 6 mm × 4, 16x2 LCD with I2C backpack (PCF8574) and Active buzzer 5 V.
- Level
- Advanced
- Time
- About 480 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Separate identity from the vote.
Parts list
- Development Boards
- Sensors
- Switches
- Displays
- Motors & Actuators
How to build it
- Enrol voters
- Verify
- Count one vote each
- Keep identity and vote apart
- For learning only
Common questions
What parts do I need for the fingerprint voting machine model?
Arduino Mega 2560 R3, AS608 fingerprint sensor, Tactile push button 6 mm × 4, 16x2 LCD with I2C backpack (PCF8574) and Active buzzer 5 V.
How long does the fingerprint voting machine model take to build?
About 480 minutes for a advanced maker.
