Components / Sensors / AS608 fingerprint sensor

AS608 fingerprint sensor

Small optical fingerprint module that works with the Adafruit library.

MeasuresFingerprints
InterfaceUART
Supply voltage3.3 V
SensorsReviewedMPN AS608Used in 2 projects
AS608
In short

What is the AS608 fingerprint sensor and what is it used for?

Small optical fingerprint module that works with the Adafruit library. Makers use it for biometric locks.

How it works

An optical fingerprint module with on-board matching.

Key specifications

Sensor specValue
MeasuresFingerprints
InterfaceUART
Supply voltage3.3 V

Pinout

V+3.3 V
TXUART out
RXUART in
GNDGround
TCHFinger touch output
VATouch circuit supply

How to use it

Uses the same commands as the R307, so the Adafruit Fingerprint library works. Check the wire colours against the seller's diagram, as they differ between batches.

Applications

Alternatives

Buy at

Common questions

What is the AS608 fingerprint sensor used for?

In maker projects: biometric locks.

How does the AS608 fingerprint sensor work?

An optical fingerprint module with on-board matching.

What voltage does the AS608 fingerprint sensor need?

3.3 V.

How do I connect the AS608 fingerprint sensor to an Arduino or ESP32?

UART. Pins: V+ (3.3 V), TX (UART out), RX (UART in), GND (Ground), TCH (Finger touch output), VA (Touch circuit supply).

What can I use instead of the AS608 fingerprint sensor?

Fingerprint sensor R307.