Projects / Ideas / Ferrite bead noise filter demo

Ferrite bead noise filter demo

IntermediateAnalog CircuitsIdeaReviewed
In short

How do you build a ferrite bead noise filter demo?

A ferrite bead and a capacitor clean up a noisy supply line feeding an analog sensor, shown with a scope. You need Ferrite bead (through-hole), Ceramic Capacitor 100 nF, Electrolytic Capacitor 100 µF, Arduino Nano, Potentiometer 10 kΩ, USB oscilloscope / handheld scope (DSO138) and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Filter supply noise.

How to build it

  1. Measure noise on the supply
  2. Add the bead and capacitors
  3. Measure again
  4. Read an analog value with and without the filter
  5. Compare the jitter

Related projects

Common questions

What parts do I need for the ferrite bead noise filter demo?

Ferrite bead (through-hole), Ceramic Capacitor 100 nF, Electrolytic Capacitor 100 µF, Arduino Nano, Potentiometer 10 kΩ, USB oscilloscope / handheld scope (DSO138) and Breadboard 830 Tie Points.

How long does the ferrite bead noise filter demo take to build?

About 210 minutes for a intermediate maker.