Ferrite bead (through-hole)
Bead that soaks up high-frequency noise on a wire.
ValueImpedance about 100 Ω at 100 MHz
PackageAxial
PassivesReviewedMPN Ferrite beadUsed in 2 projects
In short
What is the Ferrite bead (through-hole) and what is it used for?
Bead that soaks up high-frequency noise on a wire. Makers use it for EMI suppression.
How it works
Ferrite turns high-frequency current into heat.
Key specifications
| Passive component spec | Value |
|---|---|
| Value | Impedance about 100 Ω at 100 MHz |
| Package | Axial |
Pinout
Two leadsNo polarity
How to use it
Put it in series with a power line to block high-frequency noise while passing DC.
Applications
EMI suppression
Builds that use it
Alternatives
- Ceramic Capacitor 100 nFPairs as a filter
Common questions
What is the Ferrite bead (through-hole) used for?
In maker projects: EMI suppression.
How does the Ferrite bead (through-hole) work?
Ferrite turns high-frequency current into heat.
What can I use instead of the Ferrite bead (through-hole)?
Ceramic Capacitor 100 nF.
